NLS G4 DD 250C – BLACK *BOX ONLY*
£24.79 Inc VAT / £20.83 Excl VAT
This listing is for the box only, lids are sold separately. Please see the full description for more details
Out of stock
Email when stock available
This enclosure is pre milled for a dna250c and intended for use as a 2s 21700 build. It has two lids, the rear lid being a false lid purely for asthetics and symmetry. This listing is for the box only
Important points
- LIDS ARE SOLD SEPARATELY – Please check the Custom Lids category for suitable lids
- Suitable for Evolv DNA250C ONLY, DNA75 BOARDS WILL NOT FIT
- Dimensions 108x64x32.25mm
- 510 threaded for 30mm Source 510’s only (M12x1
- Threaded cutout for 12mm switch with M12x0.75mm thread. We recommend clontec switches
- Magnets supplied but not fitted. See note below about stacking the box magnets
- Laser etching is available on request
- Intended as a 2s build using a MosMax 2×20700 battery holder so suitable for 20700 or 21700 cells
Lids are sold separately as we intend to produce several options from acrylic or you might want to make your own. If you want to make your own we’ve prepared a dxf which is available HERE
To use this enclosure the way we intended, you’ll need our blanked dna250c acrylic board holder and a mounting kit, both of which come free with a board purchase.
Correct actuators are available here. More variations will be available soon
Suggested Wiring
Suggested Balance wiring
Use 1mm solid copper wire to bridge the balance contacts
Magnet installation
Out magnet supplier messed up so to fit the supplied magnets in the box you will need to stack a 3mmx1mm magnet under a 3.5mmx2mm magnet as showin in the below image.
| Weight | 0.101 kg |
|---|---|
| Dimensions | 10 × 6 × 3 cm |
