DNA Mounting Kit
£2.93 Inc VAT / £2.46 Excl VAT
Riser posts / standoffs and screws to mount Evolv DNA boards
Suitable for DNA75, DNA200, DNA250, DNA75C, DNA250C. Not DNA60’s
This mounting kit is intended to be used with out actuator sets and DNA board / screen holders
In stock
A selection of M1.6 threaded fittings to mount a DNA2530, 200 or 75 board
- 3 x 6mm brass posts, diameter 3.5mm
- 3 x 4mm plated carbon steel pan head screws
- 4 x 4mm 304 stainless steel 120° countersunk screws with a head diameter of 2.5mm
- 4 x 7mm 304 stainless steel 120° countersunk screws with a head diameter of 3.1mm
- 1 x Plated carbon steel nut
- Cutting template included with dimensions for vamo buttons
The 4mm pan head screws are for the board side.
The 4mm countersunk screws are suitable for hammond enclosures, milled gboxes or any other enclosure with a wall thickness of 1.8mm
The 7mm countersunk screws are suitable for enclosures with a thicker wall, up to 4mm just file to size.
The included nut is to be used with the spare case screw for those that appreciate symmetry 🙂
| Weight | 0.010 kg |
|---|---|
| Dimensions | 5 × 2 × 1 cm |
