Monthly Archives: January 2021

1: Choose the right liquid

Reflex works differently to every other vape device, tightly controlling aerosol particle size, airflow and temperature. User safety is a number one priority. The temperature of the coil and the aerosol produced is controlled to minimise the creation of unwanted byproducts.

Many eliquids contain components which only volatalise at a temperature where unwanted compounds are formed, such as acetaldehyde from overheated VG which gives off a sweet aroma or taste. Reflex minimises your exposure to these hazardous substances, and as such your usual liquid may not taste exactly the same.

2: Put the fill plugs in the right way !

This is absolutely crucial. Although relatively difficult to do, if the plugs aren’t facing the correct way, then the airflow and vape isn’t going to work quite the way that it should. Reflex utilises groundbreaking pressure and velocity analysis technologies, and putting the plugs the wrong way round means it isn’t going to deliver the power that you’re after. Again, nothing bad will ever happen, but you’re not going to have the best of all possible puffs.

3: Don’t overfill

Sounds obvious, but don’t put too much liquid in when you fill up the pod. As with all pod devices, if you overfill then there’s two possible unwanted things that can happen. Firstly, if there’s too much liquid in the pod, when you replace the fill plugs, the pressure may force liquid into the coil and cause a little flooding. This may escape through the inlets in the base of the pod, creating the illusion of a “leak”.

The second thing that can happen is that if there’s no room for a little air inside the pod, then what’s known as a “vapour lock” may occur. Wicking depends upon air pressure, and if there’s no air inside the pod then liquid may not flow as easily into the coil. This may potentially dry the coil and produce a weak vape. Don’t worry, you won’t ever get a dry hit, but your experience isn’t going to be the best that it can be.

4: Stay Tidy

Remember to mop up any spillages or condensate after every refill. We recommend gently dabbing any residue with a paper towel. This will ensure optimal performance and keep your Reflex in tip-top condition.

5: Keep the battery topped up

Reflex uses state of the art battery management and power delivery and is incredibly highly efficient. You’ll be surprised by how long it seems to go between recharge cycles, but there’s no harm in keeping it topped up where you can.

So if you’re near a computer or USB charger, why not give it a five minute charge when you can? Remember the device only takes roughly 40 -45 minutes to charge from completely empty, so you’ll be impressed with how much you can get in it on a cheeky little top-up charge.