12mm Clonetec Switch
£3.99 Inc VAT / £3.33 Excl VAT
Nice clicky action with approx half a mm actuation and 300g pressure estimated
They take some skill to solder and can melt easily so go in quick and use low melting point solder. By buying this switch you agree that you won’t complain if you overheat and melt this switch.
Please choose from the drop down and see the full product description for technical drawings and CAD files
Nice clicky action with approx half a mm actuation and 300g pressure estimated
They take some skill to solder and can melt easily so go in quick and use low melting point solder. By buying this switch you agree that you won’t complain if you overheat and melt this switch.
If you do melt one, then it’s possible in some cases to bring the switch back to life by pressing the actuator in and heat up the pins with an iron.
- Plain, brass, and a range of anodise aluminium materials
- Domed, flat or raised actuator
- 12mm
- 12.1mm cut out
- M12x0.75mm thread
- M12x0.75mm 14mm wrench 2mm thick nut
Please refer to the following drawings for detailed dimensions
CAD DOWNLOADS
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Actuator | Domed, Flush, Raised |
| Color | Black, Blue, Brass, Green, Purple, Red, Stainless Steel |
